| |
Repsol V 15
Description
These are pure mineral oils obtained from paraffin crude and subjected to a rigorous refining process. They have excellent oiliness and anti-aging properties. Such characteristics make these oils suitable for all types of applications not having any special requirements, including lost lubrication systems.
Recommended uses
The Repsol V-W range of products is recommended for all types of mechanisms using a lost lubrication system, that is by drip feed or similar, and general all those mechanism requiring lubricants with only a minimum of special characteristics.
Properties
High quality uninhibited oils.
Good oiliness properties.
High viscosity index.
Excellent Lubricity
Low pour point.
Quality level
DIN 51501 L-AN
ISO 6743/1 L-AN
Technical Characteristics -
|
UNITS |
METHOD |
V |
W |
VALUE |
VALUE |
VALUE |
VALUE |
VALUE |
VALUE |
ISO VD grade |
|
|
15 |
46 |
68 |
100 |
£¨130£© |
150 |
Viscosity, 40oC |
cSt |
ASTM D 445 |
15 |
46 |
68 |
100 |
128 |
150 |
Viscosity, 100oC |
cSt |
ASTM D 445 |
3.4 |
6.7 |
8.5 |
11.2 |
13.2 |
14.6 |
Viscosity Index |
|
ASTM D 2270 |
95 |
95 |
95 |
95 |
95 |
95 |
Pour Point |
oC |
ASTM D 97 |
-27 |
-24 |
-24 |
-24 |
-21 |
-18 |
Flash Point |
oC |
ASTM D 92 |
170 |
200 |
210 |
220 |
225 |
230 |
Rust, Method A |
|
ASTM D 665 |
Pass |
Pass |
Pass |
Pass |
Pass |
Pass |
Kopper corrosion, 3h,
100oC |
mg KOH/g |
ASTM D 130 |
1b |
1b |
1b |
1b |
1b |
1b |
Available in
ISO 15: 180 Kgs. Drums
ISO 46, 68, 130 and 150: 185 Kgs. Drums.
ISO 100: 875 kgs. Container and 185 Kgs. Drums.
Hazard Identification
This product is not classified as toxic or hazardous under current legislation.
Handling
Certain minimum precautions to avoid prolonged contact with the skin should be taken when handling. The use of gloves, visors or masks is recommended in order to avoid splashes.
Health and safety hazards
Inhalation: Minimum risk of inhalation as it is a non-volatile product.
Ingestion: Does not provoke vomiting. Drink water. Seek medical assistance.
Contact with Skin: Wash with abundant water and soap.
Eyes: Wash with abundant water.
General measures: Seek medical assistance.
Fire fighting measure
No special measures are required.
Fire control: Foams, dry chemicals, CO2, water spray. Do not apply water jet directly as this may cause the product to spread.
Environmental precautions
Danger of physical contamination in the case of spillage (water flows, coastal areas, the ground, etc.) due to its floating capacity and oily consistency which may cause damage to fauna and flora with which it comes into contact. Avoid its penetration into water containers or outlets.
Decontamination and cleaning: Treat as an accidental oil spillage. Avoid spreading by using mechanical barriers and eliminate using both physical and chemical means. |
|
